Pico XL & XXL Washer Disinfector

The Pico range of washer disinfectors has been developed to comply with the latest decontamination standards. Pico provides controlled automated cleaning, disinfection and drying of dental instruments and hand pieces.

The combination of a high-pressure spray arm and the patented Pulse Flushing System, ensures that your instruments and hand pieces are thoroughly cleaned and disinfected both internally and externally. Using the Pico automated washer disinfector demonstrates your compliance with documented best practice.

Pico’s one-touch operation offers the best option for the control and repeatability of the cleaning process; which in turn can be validated and documented to provide a permanent record of your decontamination procedure.

Pre-wash – Using the high-pressure spray arm and the lumen flushing facility; cold water at a temperature no greater than 35°C is used to remove gross contamination from the external and internal parts of the instruments.

Wash – Controlled temperature wash (40-45 °C) in combination with automatically dispensed enzyme/alkaline detergent removes remaining residual bio burden inside and out.

Rinse – Both high pressure spray arm and pulsed lumen flushing are utilised to remove all process residues and detergent from the surfaces of the instrument, leaving the instrument ready for the thermal disinfection process.

Thermal disinfection – The temperature of the load is raised and held at the required disinfection holding time therefore rendering instruments safe for handling and inspection prior to the sterilisation process.

Drying – Forced hot air is circulated within the chamber to remove residual moisture from the instruments and hand piece channels leaving the instrument load dry and ready for the sterilisation process

One touch safety
Simply load the instruments and touch start… a fully automated process means that the user needs to do no more than press one button... after the remarkably fast cycle, a reassuring beep lets you know that the decontamination process has been completed.

Safe and reliable – process validation is provided with every cycle *
The ‘Pico’ Washer/Disinfector has two separate circuits; these are used for controlling and monitoring the process.This unique system allows the operator to have knowledge of the true working conditions inside the wash chamber.

Auto dosing
Precise detergent dosing to facilitate accurate cycle repeatability and therefore validation of instrument washing and disinfection to comply with the latest standards.

Universal hand piece connector
For up to 12 hand pieces, the Pulse Flush System ensures the internal structure of the hand piece is cleaned. A fine mesh filter prevents recontamination of the hand pieces.

Single phase power supply -
No special infrastructure investment required. Pico connects to standard, domestic services.

R/O water
Optional inlet available
WRAS compliant